Datavideo SE-1200MU - 6 Girişli HD Switcher
Datavideo SE-1200MU - 6 Input HD Switcher
Full HD, HD-SDI switcher (video selector). Control panel RMC-260 is optional. It is 6 Channel, 4 SDI and 2 HDMI inputs available with embedded audio.
Specially designed for remote control. Multiviewer with Motion JPEG compression provides high quality output.
-SE-1200MU can be controlled by Windows PC.
- Android tablet with TCP/IP can be controlled by IPAD.
-Main features; PIP, Cut & dissolve, Adjustable for each SDI output program, (with DSK 1&2)
-Program (with DSK1)
-Preview
-Chromakey
-Frame store.
-1 U rack type
-6 video inputs ( SDI x 4 + HDMI x 2)
-Frame Sync for each input
-Flexible Mix/Effects processor
-2 Upstream Keyers, Chroma Key & Linear/Luma Key support
-2 DSK, Linear & Luma Key Modes support
-1 PIP (assignable to one of 4 keyers)
-Wipe Generator: 32 Wipe draft, Round & Heart | including frame & Softness control
-Wipe, Mix & Cut transition effects
-Full M/E Preview feature
-Each input (1-6) can be used for Frame store (Stills Store): Up to 24 frames can be stored on SD card
-Assignable outputs
-Each SDI output selectable in Menu:
- PROGRAM (w/ DSK)
- Clean PROGRAM (w/o DSK) without KJ
- Clean PREVIEW (w/o DSK) without KJ
- MULTISCREEN
- Entries 1 to 6
-XPT (Cross Point Assignment)
-PC & Tablet control
-Remote streaming using built-in Motion JPEG Streaming processor -Multiview output
-Tally exit
-GPI output
-1U rack mount
The SE-1200 Main uses an Ethernet cable to connect the unit and the PC to a router. User can set PC's IP address to 192.168.1.100 or configure PC to DHCP mode if IP address is dynamically determined by router. The SE-1200 base unit has a standard IP address of 192.168.1.101. After all the network configuration is completed, the PC and SE-1200 can communicate over the network.