Tascam DR-60DMKII 4-Channel Audio Recorder for DSLR Cameras

Compact, high-fidelity audio recorder designed for use with DSLR camera

-Uses an SD/SDHC card as recording medium

-Tascam original High Definition Discrete Architecture (HDDA) microphone preamps with high li recording inputs

-In addition to ordinary stereo recording, simultaneous recording of up to four channels is possible

-Can be mixed into four channels stereo signal

-Record levels can be adjusted independently for inputs 1, 2 and 3-4

-Dual recording function allows two files to be recorded simultaneously at different levels

-44.1/48/96 kHz, 16/24-bit, linear PCM (WAV format) recording

- Broadcast Wave Format (BWF) supported as WAV recording format

-New soft XLR/TRS combo jacks

-XLR mic/line inputs can provide phantom power (+24V / +48V)

Supports +24 dBu input when TRS mic/line inputs are used as line inputs

-"HI + PLUS" setting provides 64 dB maximum input gain

-Stereo mini-jack input supports plug-in power microphones allowing the input of video microphones and other high output microphones (+10 dBV maximum input level)

Low-cut filter appropriately reduces low-frequency noise (40 Hz, 80 Hz, 120 Hz)

-High audio output can be output to DSLR camera for recording

-Two camera outputs at different levels allow the audio signal to be sent to a line or microphone input of the camera

-Camera input allows convenient viewing of audio from DSLR camera

-Selectable mid-side decoding for use with MS microphone setups

-Slate tone functions (auto / manual) to facilitate synchronization with video files during editing

-Pre-recording function allows the unit to record two seconds of audio before recording is activated.

-Auto recording function to start and stop recording based on the input level

-A new file can be created during recording (manually or by file size)

-Automatic timing function to start recording after a certain time

- Skip Back function allows the last few seconds of the currently playing file to be replayed with just a push of a button

-Selectable delay to eliminate time delays caused by differences in the distances of the two input sources

-QUICK button provides easy access to various functions

-Split function allows files to be split anywhere

-Convenient marking function for moving to specific locations

-Equalizers for playback and level alignment function to increase overall perceived sound pressure

-File name format can be set to use a user-defined word or date

-Continue function to memorize the playback position before the unit is turned off

-Line out and headphone out (3.5mm jack) with individual level controls

- 128 x 64 pixels LC display with backlight

-USB 2.0 port

- Foot adapter (¼ inch) on the bottom for attaching the unit to a tripod

-DSLR bracket for camera attachment and coin removal

- Dedicated remote jack (for use with RC-10 and RC-3F (sold separately))

-Press and hold the button to prevent accidental operation

-Front left and right side arms protect the screen and can be used to attach a shoulder belt

-Powered by four AA batteries, an optional AC adapter (Tascam PS-P520E ), optional external battery pack (Tascam BP-6AA ), or USB bus power

-Automatically switches from external to internal when the power supply is needed (with a pop-up message on the screen)